Launch day and reflection…7-16-2023

We had another great launch yesterday. Many attended and launched a lot of rockets. Rich Redhead and I both had radio controlled boost gliders to fly.

Prepping at the studio the day before.

His X-15 which is one of my kits converted to RC and a Frank Burke Dynasoar Rocketry Aurora Clipper space plane. Both flew very well.

After a great flight.

Getting reading to launch on the pad.

Rich loading the X-15 on to the launch rail.

Preparing the day before I realized how much we have grown in the last year. It takes awhile to prepare and load all the equipment we now have. Two launch pads and all the electronics and control stations, tables, tent shades and more. 

Then there’s the rockets themselves and prepping them. Making sure you have all the motors, ignitors, wadding and a bunch of other things takes a while. 

Then you get up at 5 am and drive out to the site. Unload, setup, and then we launch. Then comes the breakdown and load up again before heading back to our studio to unloaded all the gear from the day’s launch.

Once home I download all the video and pictures to the computers and edit a show of the day’s launch and upload it to YouTube.

It made the day go quickly and kept my mind so occupied it was hard to think at all about surgery I have to go through this Tuesday.

I have never been one to sit around and wait for something. Never, you just keep moving forward. The same goes for afterwards. As soon as I can I’ll be up and at the studio. Sure I’ll take it easier than usual but the work, the making, and dreaming of new creations is life. The development, planning, and the excitement keeps one’s mind hopeful, inspired and alive!

What a great day it was at the launch. I am so grateful for this great time and joy.

BTW I ended the launch flying RC Gliders at the launch site with my friend Rich Redhead. Our beautiful silent gliders flew like birds on the lift and thermals.

Here’s some pictures in a gallery of the day and the video that shows the flights.

Challenging times and project meditation 7-14-2023

This entire week has been a rough one. starting with a rough night of sleep before my Cystoscopy on Tuesday morning. To say it was unpleasant and painful would be the largest understatement I have made in my entire life.

For the 3 days that followed, just urinating was excruciating. However it was durable and I got past it thanks to being able to focus my mind elsewhere at the time.

Yesterday it started to improve with less pain. By the end of the day I was fine. Today was even better. I slept so hard last night I feel drugged this morning but I’m OK.

They found a small bladder tumor so next Tuesday I have another cystoscopy but this time I’ll be under while they remove the tumor. I’ll be home the same day but again I’ll have another rough 3 days. But that will be the end of it. Hopefully it’s benign. 

So the rest of the week I worked on learning how  to use my 3d printers. It focused me well on the task and I learned a lot and got them both working pretty well.

It was good to go to the studio and keep the routine going while I got past all these health procedures.

Today I plan to  work on an old project of my WW2 era F4U Corsair.

And prep my Dinosaur Rocketry Aurora Clipper rocket plane ready for our Ventura Rocketeers launch this Saturday. This will be our 11th launch at our site in Moor Park. This plane gets launched like a rocket and flies under radio control for a nice flight and soft landing.

I have started designing my all wood slot car track to pass time. I have been wanting a wooden track since I was 12. Wood tracks are the very best and the most realistic looking. I have been working in photoshop working at scale size in the space I have.

Eventually the scale overview will be turned into sections printed out I can place on MDF panels and cut the sections out.

So I’m keeping my mind busy and with scary stuff to go through it really helps.

My film won an award…

Star Trek Sirius won an award. I have never won an award for anything in my entire career. Awards were never my thing and I never pursued them or lobbied for them. But this one is kind of cool because I didn’t expect it. Justin Heard was the real winner. He’s a fine actor and he did a great job.

3D printers, flying, models, and health 7-11-2023

Yesterday was an interesting Monday. I got my MRI results back and they found a small little thing in my bladder. So I’ll be in and out of seeing the doctors for a while. 

It will have to be removed. I’m having a Cystoscopy procedure today. It’s likely it’s not cancer. But I have been living with the discomfort of this for a while now and either way it will be a relief to have it removed. Whatever treatment follows after that follows and I should be down with it.

So writing here may be sporadic at times. We’ll see. But if it gets a bit quiet you’ll know why. Not to worry I’m just dealing with it and I’ll be OK.

Moving on to more fun details of life Mark Helmick brought over a first cut and particle assembly of the Steve Neill’s Garage 1/32 kit. He did a bunch of trail fitting and this is going to be one great little kit. It will have options available too.

Like garage tools and equipment due to my latest acquisitions of a resin printer and a PLA printer. 

Both were gifts. One from my good friend Carl Soto and the resin printer was a 10th anniversary SNG Studio gift from my very long time friend Dave Wooten of Smith Brothers Hobby Center.

It’s my hope between the laser cutter, resin printer and PLA printer I’ll be able to put out some nice model kits, figures and more. It will take me some time to get up to speed on all this. I already have the PLA printer ready to run tests soon.

I did a maiden flight with electric power of my all scratch built, hand cut, Aquila Grande at the field last Sunday. It flew very well and that’s another one under my belt for now. 

I’ve started back to the wood built F4U Corsair also given to me by Dave and hope to get that one flying soon too.

10th Anniversary Issue of SNG News July 8, 2023

At SNG this week my main drive was to finish up the Communion Visitor mold and produce a first test product to see how well it would all work. I opened up the mother mold on Monday. It came out well. I removed all the clay and cleaned up the mother mold. I placed it back over the sculpture and registered it and aligned it placing the two halves around the sculpture.

Then I clamped it all together and poured the silicone rubber into the opening at the top and waited overnight for it to set up.

Tuesday I opened the mold and removed the clay sculpture. Cleaned the mold and cast up a first bust in 2 part resin. It turned out very well.

Wednesday I painted the bust, glazed the eyes and laser cut the base and plaque that Whitley Strieber will sign.

I was pleased with the end results and I shared it on social media across the net. The response was great. People that know this subject seem to like it very much. Next step will be to make more and work with Whitley next week when these will be available on his website store Whitley’s website is: 

unknowncountry.com

Some of our new projects and products we will be making will be aided by this 3D printer that our friend, Carl Soto brought us over this week. 

It is set up in the office to keep it away from dust. I am looking forward to trying out all kinds of things from SNG model kits and figures,slot-car bodies and more.  Between the 3D printer and the laser cutter it is our hope that we can make things that are more affordable than projects that require physically demanding lifting of heavy molds, pouring rubber, and casting resin into those heavy molds. The materials cost are lower too. Currently our products are very pricey because of material cost, time and labor,which in many cases, has gone up  over 200 percent. (in other words, supplies have more than doubled)

The scratch build that I cut every part by hand and crafted from plans, Aquila Grande has been modified for electric power this week. Can’t wait to fly her!

This is her before I cut off her nose and installed the electric motor and prop that I got from Smith Brothers Hobby Center.

And here she is with her new electric power and folding prop.

Thank you Dave for your help in getting this all together by picking out the correct motor, ESC, and Prop for this conversion!

🐕‍🦺 Rosie at 13 years old, played ball with me in the morning as I have done for over 12 years now. In the grand scheme of the universe moments like this are the very the best it has to offer.And here’s a video of the joy: https://www.youtube.com/watch?v=fGPrLmahxbI

It is our 🎉 10 Year Anniversary 🥳 here at SNG Studio. Thank you for the love and support you have given us over the years.  We can’t begin to express our appreciation to our friends here for the years of loyal support in helping keep our studio doors open! You can help support SNG Studio and be a part of the Magic on  Patreon. (Every bit helps 🙏🏻)

Join us in celebrating Creativity & Imagination!

Love You Bunches!

Steve and Mary

A good day at the studio and good Trek 1-5-2023

The fourth was an average day around the studio. To me it’s just a day or evening to get through and I’m glad when it’s gone. Seeing my dog Nova cowering under my shadow scared for her life, shaking from illegal fireworks so prolific that it feels like being in the middle of a war is not something I can appreciate. She held her little toy in her mouth for comfort and shook. It’s a sad sight when human beings celebrate war by artificially recreating it.

There may have been a time when I thought it was cool because I was too young to realize what it was really all about. People having an excuse to make noise and playing war. No one is actually celebrating freedom or independence. If they were, it would be more like Christmas than what I experienced last night. Celebrating freedom from facism means peace, the right to thrive and love.

Moving on from my rant we did have a nice day of cleaning the shop for our 10th anniversary of our studio opening all those years ago. What an amazing thing to have been there all this time.

The Communion lady mold came out perfect and opened well. I was able to cast a first piece from the mold with excellent results. Today I’ll paint it and place it on a base with a laser cut plaque.

I also had some time to place the motor and ESC in my all scratch built Aquila Grande Glider. The motor fits well and the center of gravity is perfect with the battery in place. It was a surprisingly easy conversion. Hopefully I’ll finish it off this week and test fly it Sunday. It has flown before as a slope glider so there shouldn’t be any surprises.

Mary cleared off and cleaned up a space for the 3D printer in my office away from dust.

We are clearing out the bay and moving tables and equipment back to make room for our guests and this picture of our beautiful classic sports car jumped out at me. I feel blessed to own her.

Lastly we watched the third episode of Star Trek Strange New Worlds. It was excellent. Enough said. However after over 50 years it’s nice to have classic Gene Roddenberry Star Trek back again.

The times they are a changing…1-4-2023

It has been a year so far of getting new machines that will help our efforts to make new products without a lot of modeling and heavy lifting a little less.

For instance I have planned for a while now to sculpt in clay, scan, and 3D print without needing to make molds. They are heavy even when made in fiberglass-silicon and hard to handle. Plaster and stone molds are the worst.

As you know, recently we were able to afford a laser cutter. Yesterday my dear friend and creative artist Carl Soto brought us a Creality 3D printer. It’s never been used and has been sitting collecting dust. He thought maybe we could use it.

It came with lots of filament.

Between the laser cutter and the 3D printer I will be able to create a lot more products. This bed looks large enough to print out some pretty large creature and monster busts replacing latex masks with their limited shelf life.

Also slot car bodies and other types of models not on the market.

Yesterday I cast up the Communion bust. Last Friday I made the case mold and yesterday I poured the silicone. This morning I will open the mold and start casting up the first bust.

The mold is made of 1630 urethane and 1065 silicone. This mold will be able to cast a lot of busts in two part urethane resin which has an indefinite shelf life.

Exciting times at the studio. We are so grateful for our loving friends and supporters that have made all this possible.