Letting the epoxy and paint cure over the weekend and out they go Monday. Thank you all for your orders and for the wait. It takes me time to get these made since I’m the only one making them. Everything is done by hand from the sculpture to the molds and casting. Prepping, and painting. The eyes are epoxy glazed on the Galaxy Being.
Masks nearly finished
Last batch of rubber was problematic to say the least. It was bubble prone and took days to dry out. Recently I got the rubber from Burmans I normally use and it made quite a difference. Due to the pandemic made it difficult to get and they were out of it for quite a time. This made me get it from a different source.
So it’s taken me a while to patch and repair these masks. Today I’ll finish the eyes one the Galaxy Being and glaze them.
Everything ships on Monday. I want them to thoroughly dry over the weekend before I box them up.
I worked a bit more on the pit box. I really like this better than some big wooden box like we used to use in the 60’s.
Filling mask orders
By the time we got to the studio yesterday late I still had time to pour a Galaxy being which will come out of the mold today.

I found a lot of bubbles in the Sixth Finger mask on close inspection. I spent a good part of the day removing and filling those bubbles with cabopatch. Also removed and filled the seam line. Removed the eyes and dremel tooled the edges smooth. He’s now ready to paint today.
I also prepped and painted the Eye of the Beholder mask. I’m using a new paint from the Burman’s, Createx. Great stuff for painting masks. Flows well out of an airbrush, sticks well to rubber, and it’s easy to clean up.

Lastly we took a trip to Harbor Freight and I got a new pit box for the slot cars. I have to look sharp as we are back to racing with the FarrOut Slot Car Club. We have a very active group!

Today I’ll mod it to suit my needs but the club recommended these to use.
Back to it
After being out of town for 4 days visiting family abroad we are back to work and ready for action. We stopped along the way at Burman Industries to pick up some much needed supplies.
Getting this stuff shipped from LA to Ventura costs hundreds of dollars so we have to take that long drive and pick it up.
After having such a great sub run last Saturday I’m eager to finish this type 23 German U-boat.
Lots of mask orders to fill this week. Looking forward to it!

More footage of the VIIC
Pictures of my U-boat from last Saturday
Thanks to Tom Chalfant. I’m really happy with this boat.
LA Subron fun run 9-11-2021
Mary and I had a great day of fun at the best little lake there is for running our boats. Yorba Regional State Park. Jeff Proteus was a great host. We got there quite late so we missed the other bubbleheads but there were a few left.
I ran my Type 7 for the first time and it was in the water for over 2 hours running great.
Next time I’ll bring the Nautilus. One boat at a time always works better I have found.
More on masks and slot car bodies
Never trust Wikipedia. It is an unreliable and miss informed source of public information. Even bias when it comes to certain facts and information.
When I researched the specs on the 1959 T51 Cooper it said the wheelbase was 104 inches. After I did the math and scaled it to 1/32 it looked too big to me. Later checking Marc Tyler’s Immense Miniatures driver against it I just knew something was wrong. I checked some more and found the same wheelbase on other websites. They were wrong.
With a little deeper research I did find some sights that had the correct 91 inch wheel base. It may not sound like a lot of difference especially when it’s such a small model but it does.
I made another body master in dense foam yesterday based on the correct wheel base and it’s now correct.
Next week I’ll epoxy glass this master and start the real smoothing and detailing.

Formers and block cut form 
Driver is small in the first try 
second body at correct scale next to the first 
You can clearly see the size difference
I also have an Eye of the Beholder Mask out of the mold and drying over the weekend. Big paint day monday on both masks.

And the Lazar Saucer is coming along too.

Painted parts just stacked together not properly fitted as of yet.
Flying Saucers, Masks, and Slot cars
Mixed bag of goodies this week. The Sixth finger mask is out of the mold and will take over the weekend to dry out enough to be preened and made ready to paint. I put some two part polyurethane foam in the top of the head so it can be worn.
The Lazar saucer got a lot of paint. This will take days to dry properly.
And the T51 Cooper body is shaping up nicely. I also got an “Eye of the Beholder” mask cast up for a customer.
Always fun to do!
Sixth Finger mask on the way 9-9-2021
This mask is taking it’s time setting up. I should be able to pull it out of the mold today.





















































